1 0
    rated 4.5/5 by 7,051 customers

    Aerly Maternity Compression Socks - Set of 5 Pairs

    Aerly Maternity Compression Socks - Set of 5 Pairs

    For the Mom Who Works on Her Feet.

    Hand Crank Or Drill Powered. Your Choice.
    Three Feed Holes — 1" / 3/8" / 5/32" Cable OD.
    Full Aluminum Alloy Body.
    64Mn Heat-Treated Cutting Wheel.
    Setup Guide Included — So It Works On Day One.
    delivery-truck-cargo Free Shipping | lock 30 Day Guarantee
    Your Information and Payment are 100% Secure

    Our Customers Love BB-25 Wire Stripping Machine

    Product Details

    The BB-25 is a mechanical wire stripping machine. You feed cable into one of three holes, the toothed rollers pull it through, and an adjustable cutting wheel scores the insulation along its length. The jacket peels off. The conductor comes out whole.

    The difference between this and a hand stripper is simple: the machine pulls the wire. You don't.

    SPECIFICATIONS

    Cable Range:     0.06" – 1" outside diameter (1.5 – 25 mm)
    Feed Holes: Three — 1" / 3/8" / 5/32" (25 / 10 / 4 mm)
    Feed Plate: Rotating, multiple positions
    Drive: Hand crank or power drill (drill not included)
    Frame: Full aluminum alloy
    Cutting Wheel: 64Mn heat-treated steel, bearing-mounted
    Rollers: 45# steel, black oxide, V-toothed
    Panel: Clear acrylic — you can watch the cut
    Weight: 3.75 lbs (1.7 kg)
    Dimensions: 5.2" × 2.36" × 9.25" (132 × 60 × 235 mm)
    Mounting: Bolts to a workbench — hardware included

    Honest note: this machine is built for round cable — THHN, single-strand,
    service wire, anything #6 and up. Flat Romex and coax will strip, but usually
    take two passes. Very thin and braided wire is not what it's for.

    Whats Included

    1. BB-25 wire stripping machine
    2. Drill adapter rod
    3. Hex keys
    4. Mounting hardware
    5. Work gloves
    6. BB-25 Setup Guide (PDF — emailed the moment you order)

    Refund Policy

    30-day money-back guarantee.
    If they do not fit, or you just do not like them, email us within 30 days. We will refund you.

    Full details: Refund Policy
    For returns, email info@aerlyco.com

    View full details

    That Pile Has Been There Three Years

    Yards Don't Pay For Plastic

    Bring in wire with the jacket on, you get paid for the plastic too. Which is almost nothing.

    Strip it first and it's bare bright. Top price, every time.

    Same wire. Same trip. Three times the check.
    Before image
    After image
    BeforeAfter

    The Knife Way

    An hour with a utility knife gets you about 25 bucks of copper, a sore hand and a few nicks you'll feel tomorrow.

    The BB-25 pulls the wire through for you. You just crank.

    Same hour. Bigger pile.

    When Does It Pay For Itself?

    Around 35 pounds of stripped wire. That's one corner of the garage. Prices move daily and every yard is different, so check yours.

    Results:
    $5+/lb. Bare bright. Clean, stripped copper.
    A third. What the same wire pays with the jacket on.
    35 lbs and the machine has paid for itself.

    Bolt It Down. Crank It. Done.

    The rollers grab the wire and pull it through. A blade scores the jacket as it goes. The copper comes out the other side.

    Crank it by hand or put a drill on it and go faster.

    Every BB-25 Comes With The Setup Guide

    These machines only work when the blade sits right. Too high, the wire slips. Too low, it jams.

    The guide shows you how to set it. You get it by email the minute you order.

    Read it while the machine ships. Clean copper on the first pull.

    What Came Out The Other Side

    Frequently Asked Questions

    Will it strip Romex?

    Yes, but flat cable usually takes two passes. Round cable like THHN goes through in one.

    What about thin wire?

    It's built for #6 and up. Thin stuff will go through, but it takes a steadier hand and it's slower.

    Do I need a drill?

    No. The crank works fine. A drill just makes it faster.

    Does it have to be bolted down?

    Yes. It needs to be solid or the wire pulls it around. Hardware is in the box, and the guide shows you where.

    Where do I get replacement blades?

    From us. Add one to your order or grab one anytime from our site.

    How fast does it ship?

    From our US warehouse. 2-5 days with UPS, free.

    What if it's not for me?

    30-day money back guarantee, from the day it arrives. Email us at info@barebrightco.com and we'll sort it out.